SPRAY TYPE
ATOMISE
FAN
FOG
FULL CONE
SPIRAL
TANGENTIAL
APPLICATIONS
Air Atomiser
Air Nozzle
Condenser Fog Cool
Cooling Tower Nozzle
Clamp-On Spray
Deck / Hull Cooling
Dust Suppression
DIY Misting
Eductor
Filter Nozzles
Fire Protection
Foam Nozzle
Oil Mist Nozzle
Retractable Quill
Tank Cleaning
Tank Cooling
  PORTABLES
AAMA Test Kit
Aeroponics
Fog / Dust Cannon
Lance Assembly
Lub Oil Demister
Misting Fan
Wash Module
HomeBrochuresSpray SkidTestQA & Orifice CalContact Us
AAMA Test Kit for Fenestration Testing Laboratory
Spray test kit for Curtain Wall, Storefront, windows seal, slope glazed system, architecture frames in compliance to AAMA204-98
 
" Guidelines for AAMA Accrediation of Independent Laboratories performing On-Site testing of Fenestration Products"
 
Nozzle                 : 1/2M250-90
Flow rate              : 23 liter/min @ 1 bar
Orifice diameter    : 6.35mm
Spray angle          : 90 deg full Cone
Water supply        : 3 bar
Distance to target : 12 inches
 
Download Cat : AAMA Test Kt
AAMA set

 

AAMA nozzle Model : 1/2M250-90 spray test discharging (K factor) of flow-rate 1.3 cubic m per hour @ 1 bar (23 liter/min @ 1 bar) trajecting at 90 degrees full cone.

Water Tightness test for Windows and external wall joints

Two header line of water inlet and air inlet respectively.

Water header is 1m length stainless steel tubing with 6 nos 90 degrees full cone spray nozzle.

Air supply is 1m length stainless steel tubing with 6 nos air nozzle.

Both in operation to simulate wind driven deluge rain.

Total water flow-rate : 23 liter/min @ 3 bar

Downlad catalogue : AAMA Water tight test header.pdf