H2SO4 is 95% concentration in liquid form. In the event of spillage during bunkering, fog system is activated to coalesce and mitigate H2SO4 Gas from proliferating the area.
Adjustable air atomising
assemblies combines air and liquid by knob adjustment. By
changing the spray tip setup, fine Fog / Mist can be attained without changing
the body assembly.Material : 316 SS
or brass.Size :1/4" NPT (F).Catalogue : SUE18A Cat
Large Critical Mass / Density Air Atomiser for Dry Fog
This device
facilitates liquid flow
and air flow to come into contact with
each other to generate a large critical
mass of fine Dry Fog used for dust suppression
or heat absorption. The
two stream of liquid and air collide in
the spray cap chamber and exit at high
high velocity fine Dry fog. Spray tip 60, 90 and 120 degrees
This is a light duty fog generating module
trajecting fog at a distance of 5 to 7m with dense
fog with no wind draft..
It is low cost sold as parts and easy to install for
customer's own assembly. Large Critical mass of fine fog
generated through our Ruby Insert Fog Nozzles traject
high velocity .
Self contained with 41 liter water
container, driven by single phase electric motor
discharging 8
liter/min @100bar through seamless stainless steel
tubing with nine (9) qty of R-50 Fog Nozzles
inter-connected by
compression fittings for customer's own assembly.
Suitable dust suppression at construction site,
incineration plant, wood dust, marble dust etc. It is portable, easy to assemble
and easy to use for fast setup.
Serie 8 Ruby Insert Fog Nozzles
are used in the above video with 7
nozzles
R-50 fog nozzles (without ruby insert) are used in the below Video with 9
nozzles
Observe the
difference in spray angle and fog mass
An Assembled basic module as seen
below takes us five days to
hook up and cost is about S$7,000.
If added features such as Serie 8
Ruby Insert Fog Nozzles, high
pressure pulsation dampener and
reservoir, Two (2)
microns suction filtration stages,
float valve for water inlet
continuous flow etc would cost about
(Singapore Dollars)
S$11,000.
Fog Cannon
for 20m.
SCY-20
is heavy duty fog generating
cannon trajecting fog at a distance of 20m.
Spray droplets ranging from
30 to 150 microns trajects a distance of 20m
covering 1,500 sq m.
Powered by a heavy duty pump
discharging water at a rate of 24 liters/min @
20bar through
one (1) ring array of ten
(10) qty Wilson
W1/4-30 atomising nozzles, critical mass mist is
produce. With the large inline turbine
generating air flow of 500m3/min, high velocity
critical mass mist coalesce effectively with
floating dust particulates.
Download Catalogue :
SCY-20 Fog Cannon.pdf
Fog Cannon for Dust
Suppression to
100m.
SCY-100
is heavy duty fog generating
cannon trajecting fog at a distance of 100mSpray droplets
ranging from 30 to 150 microns covering 25,200 sq m.
Powered by a heavy duty pump discharging water
at a rate of 200 liters/min @ 35bar through
three (3) rings array of atomising nozzles,
large critical mass of fine mist is produce.
With the large inline turbine generating air
flow of 3050m3/min, high velocity critical mass
of mist coalesce effectively with floating dust
particulates.
The panning of 320 degrees and tilting angle of
+45 degrees allow mist projection at great
fexibility.
It has local control features and a user
friendly remote control module
With IP-55 ingress protection, SCY-100 is
designed to work in demanding weather
conditions.
Mainly used in construction sites, demolition,
mining, fire suppression, landfill, composting.
Download Catalogue :
SCY-100 Fog Cannon.pdf
