SPRAY TYPE
ATOMISE
FAN
FOG
FULL CONE
SPIRAL
TANGENTIAL
APPLICATIONS
Air Atomiser
Condenser Fog Cool
Cooling Tower Nozzle
Clamp-On Spray
Deck / Hull Cooling
Dust Suppression
DIY Misting
Eductor
Filter Nozzles
Fire Protection
Foam NozzleOil Mist Nozzle
Retractable Quill
Tank Cleaning
Tank Cooling
  PORTABLES
AeroponicsAir Purifier Scrubber
Fog / Dust Cannon
Lance AssemblyLub Oil DemisterMisting Fan
Wash Module
HomeBrochuresSpray SkidTestQA & Orifice CalContact Us

FOAM NOZZLES

       EXPANSION FOAM NOZZLES
The Expansion Foam Nozzles consist of a body and a deflector especially designed for an optimized foam distribution. The foam solution stream is fractioned and air is sucked in inside the brass body, and then distributed by the deflector with covering angles up to 90. Foam expansion rate typically 1:20 or 1:50.  Body Material : Brass or 316 stainless steel

 Cat : Expansion foam nozzles.pdf

    FOAM  Nozzles
      Low flow
  • Stainless steel Material
  • 1/2 inch Male NPT or BSP
  • Pressure 2.1 bar to 4.2 bar
  • Flow : 61 liter/min @ 2.1 bar
  • Maximum working : 12 bar
  • K factor : 42
  • Coverage : 9.3sq.m.(100 sq ft)
  • Minimum foam solution application rate as per NFPA of 6.5 LPM/sq.m.

Cat : low Flow Foam Nozzle

    INERGEN  Nozzles
     
Inergen is an environmentally green three dimensional fire suppression agent replacing Halon 1301. It  is a blend of three naturally occurring gases--Nitrogen, Argon, and Carbon Dioxide.
 
The Inergen discharges through nozzles to ensure optimum distribution in the protected area effectively suppressing the fire.
 
Download Cat : Inergen_Brass.pdf