SPRAY TYPE
ATOMISE
FAN
FOG
FULL CONE
SPIRAL
TANGENTIAL
APPLICATIONS
Air Atomiser
Condenser Fog Cool
Cooling Tower Nozzle
Clamp-On Spray
Deck / Hull Cooling
Dust Suppression
DIY Misting
Eductor
Filter Nozzles
Fire Protection
Foam NozzleOil Mist Nozzle
Retractable Quill
Tank Cleaning
Tank Cooling
  PORTABLES
AeroponicsAir Purifier Scrubber
Fog / Dust Cannon
Lance AssemblyLub Oil DemisterMisting Fan
Wash Module
HomeBrochuresSpray SkidTestQA & Orifice CalContact Us 
Fog Cannon for 5m.
This is a low cost fog generating module trajecting fog at a distance of 5 to 7m with dense fog. Large Critical mass of fine fog generated through our Ruby Insert Fog Nozzles traject high velocity .
 
Self contained with 41 liter water container, driven by single phase electric motor discharging 8 liter/min @100bar through seamless stainless steel tubing with seven (7) qty of R-50 Fog Nozzles inter-connected by compression fittings for customer's own assembly.
 
Suitable dust suppression at construction site, incineration plant, wood dust coalesce, marble dust etc. It is portable, easy to assemble and easy to use for fast setup.
 
Download Catalogue             : Portable 5m Fog Cannon.pdf
Download Nozzle Catalogue :  P__Series.pdf
 

Both Spraying at 100bar

Serie 8 Ruby Insert Fog Nozzles (0.2mm orifice diameter) are used in the above video with 7 nozzles

R-50 fog nozzles (0.5mm orifice diameter without ruby insert ) are used in the below Video with 9 nozzles

 

An Assembled basic module as seen below  takes us five days to hook up and cost is about S$5,000.  If added features such as Serie 8 Ruby Insert Fog Nozzles, high pressure pulsation dampener and reservoir, Two (2) microns suction filtration stages, float valve for water inlet continuous flow etc would cost about (Singapore Dollars) S$11,000. 
CENTRIFUGE MISTING FAN with Atomising Nozzles for large Mist Mass to 10m
HW-26 centrifuge misting fan complete with four (4) qty W1/4-30 Atomising nozzles or Six (6) qty R-50 Ruby Insert Fog Nozzles pump assembly for critical mass Fog / Mist output.

Four (4) units of W1/4-30 full cone nozzles Interconnected by means of compression tubes and fittings to the Eight (8) liters/min @100 bar high pressure pump, integrated onto the centrifuge Misting fan HW-26 generating large mass of mist. The excellent feature of portability and ease of transportation yet trajecting spray at high velocity and large critical mass of mist using only single phase power instead of three phase is ideal for any site application.   

Fog Cannon for 20m.
SCY-20 is heavy duty fog generating cannon trajecting fog at a distance of 20m.
 
Spray droplets ranging from 30 to 150 microns trajects a distance of 20m covering 1,500 sq m.
Powered by a heavy duty pump discharging water at a rate of 24 liters/min @ 20bar through
one (1) ring array of ten (10) qty Wilson W1/4-30 atomising nozzles, critical mass mist is produce. With the large inline turbine generating air flow of 500m3/min, high velocity critical mass mist coalesce effectively with floating dust particulates.
 
Download Catalogue : SCY-20 Fog Cannon.pdf
 
 
Fog Cannon for 100m.
SCY-100 is heavy duty fog generating cannon trajecting fog at a distance of 100m
 
Spray droplets ranging from 30 to 150 microns covering 25,200 sq m.
Powered by a heavy duty pump discharging water at a rate of 200 liters/min @ 35bar through three (3) rings array of atomising nozzles, large critical mass of fine mist is produce. With the large inline turbine generating air flow of 3050m3/min, high velocity critical mass of mist coalesce effectively with floating dust particulates.

The panning of 320 degrees and tilting angle of +45 degrees allow mist projection at great fexibility.
It has local control features and a user friendly remote control module
With IP-55 ingress protection, SCY-100 is designed to work in demanding weather conditions.

Mainly used in construction sites, demolition, mining, fire suppression, landfill, composting.
 
Download Catalogue : SCY-100 Fog Cannon.pdf