SPRAY TYPE
ATOMISE
FAN
FOG
FULL CONE
SPIRAL
TANGENTIAL
APPLICATIONS
Air Atomiser
Air Nozzle
Condenser Fog Cool
Cooling Tower Nozzle
Clamp-On Spray
Deck / Hull Cooling
Dust Suppression
DIY Misting
Eductor
Filter Nozzles
Fire Protection
Foam NozzleOil Mist Nozzle
Retractable Quill
Tank Cleaning
Tank Cooling
PORTABLES
AAMA Test KitAeroponics
Fog / Dust Cannon
Lance AssemblyLub Oil DemisterMisting Fan
Wash Module
HomeBrochuresSpray SkidTestQA & Orifice CalContact Us

Spiral Spray Nozzles - Full Cone and Hollow Cone  - T series

 

hjxgfjxbcv

 

FULL CONE SPRAY
 
T Series Spiral nozzles work on the impact principle by deflection of a water stream onto a spiral surface which generates a continuous spiraling liquid curtain. The spray droplets produced are smaller than the internal vane type for the same connection size, other features such as:-
   
1) the spray angle is maintained even at very low pressures and when spraying high viscosity liquids
2) because they don't have a vane in them they are virtually clog free
3) they produce much smaller droplets than standard full cone nozzles
4) they are available in the widest range of materials of any nozzle type
 
Typical Applications - fire fighting, air pollution, exhaust scrubbing, gas cooling, dust suppression, defoaming.
Connection: 1/4" to 4" BSP or NPT,                
Spray angles: 60° to 180°
Material: 316L Stainless Steel, Brass, PVC, PP, PVDF (Kynar), PTFE (Teflon*), Hastelloy, Silicon Carbide.
DOWNLOAD CATALOGUE - T_Series.pdf      
 

 
HOLLOW CONE SPRAY

 

dfgkj

Spiral Fix Non Clog 300° Foam Deluge Nozzle

270 degrees spray
 
Spiral Non Clog 300° Foam Deluge Nozzle Type WA
Fix one piece casted head, high velocity, non clog spiral nozzles.
High impact droplets impingement.
For Fire Fighting Foam distribution, Scrubbing and Rinsing of tanks.
Connection - 1 inch Male BSP
Spray Pattern - 300° impact spiral jets
Material - 316 Stainless Steel

Download Catalogue : WA_Tank Rinsing.pdf

Spiral XT Series in 2 or 3 pieces
DESIGN FEATURES
* 2 piece or 3 piece assembly
* Inter-changeable tips
* Exotic material in C276 Hastelloy
or Silicon Carbide
* For Demanding applications
* Maximum Free Passage
 

Download Cat : XT series.pdf

SPRAY CHARACTERISTICS
Spray pattern: Full Cone
Spray angles:90° and 120° standard
Flow rates:2.26 to 10700 l/min

Spiral Spray Nozzles with PLASTIC CAP
Plastic Cap to prevent accidental knocking onto the spiral tip.  It is easily fitted onto nozzle without the need of lanyard and is held onto the groove by snug fit.
When pressure discharge occurs, plastic cap is blown off to  effect a spray coverage. 
 
Material : Polypropylene.
Colour : Translucent
Available for nozzle size : 1/2"

 
 
Wilson Spray Nozzle - Singapore
Tel: +65 67741828 (Sales Hot-Line)   Fax: +65 67779813      E-mail: sales@wilsonspraynozzle.sg